LEO-54G-DL ADSL2+ Modem with WiFi Router
The new Leoxsys LEO-54G-DL ADSL2+ Modem with Wireless Router is really many devices rolled into one. It’s a full rate ADSL2/2+ modem. It’s s a router,capable of networking up to 54 computers using wires , with a minimum amount of hassle. And, it’s a wireless device, allowing you to have the freedom to connect to the Internet without being anchored by cables or cords, surfing at speeds up to more than 5 times the speed of older devices.
High Performance with BSNL,AIRTEL ADSL line
A step-by-step visual setup guide, the Installation Buddy provides simple, straightforward instructions for procedures that were once the province of IT professionals. Now, you can eliminate most ofthe confusion inherent with installing DSL modems or gateways. With this DSL Modem with Wireless Gateway,you will get it all: flexibility, simple installation and trouble-free operation and give high performance wih BSNL,AIRTEL ADSL+ line.
Inbuilt ADSL splitter
The new Leoxsys LEO-54G-DL ADSL2+ Modem with Wireless Router has RJ-11 splitter inbuilt so direct line goes to LEO-54G-DL router and one RJ-11 for reguler Telephone line
Features
Integrated Wired and Wireless Networking using 802.11g and 1 Port 10/100 Mbps Ethernet
802.11b backward compatible,communicating with 802.11b wireless products at speeds up to 11 Mbps
802.11g enabled to support speeds up to 54 Mbps wirelessly
Full-rate ADSL 2/2+ modem - supports data rates ofup to 24 Mbps downstream and up to 1 Mbps upstream
Exceeds performance ofthe DSL Forum specification
Loop reach ofup to 18,000 feet using ADSL and 18,600 feet using ADSL2+
Tested and compatible with all major DSLAMs
Advancedsecurity: WPA, WPA-PSK, WEP, Firewall, Stateful Packet Inspection, NAT, website blocking, web service blocking, Internet traffic logging, Denial ofservice blocking, Internet traffic logging, Denial ofService (DOS) protection
|
--> Compatible with 2.4GHz IEEE802.11g and backward compatible with IEEE 802.11b standard. |
|
--> Supports NAT/NAPT IP sharing. |
|
--> WAN Protocols: PPPoE/PPPoA |
|
--> High speed data rate - up to 54Mbps. |
|
--> Supports Port Forwarding and DMZ. |
|
--> Supports BSSID function. |
|
--> Supports 64/128-bit WEP encryption and WPA-PSK security. |
|
--> Supports MAC/IP filtering and URL blocking. |
|
--> Supports DHCP server and Anti-Dos firewall. |
|
--> Web user interface (remote configuration). |
|
--> System status and security log. |
|
--> Supports Firmware upgradeable. |
|
|
| Model |
LEO-54G-DL |
| Standards |
802.11g,802.11b,802.3,802.3u |
| Ports |
ADSL2+ RJ-11 line,RJ-11 Phone,RJ-45 LAN,Power cord, mini USB |
| Buttons |
Reset,Wi-Fi Protected Setup |
| LEDs |
Power,DSL,Internet,Ethernet,USB,Wireless |
| Frequency Range |
2.4~2.4835Ghz |
| Cabling Type |
CAT 5e,DSL cable |
| Detachable(Y/N) |
Yes |
| RF Pwr(EIRP) in dBm |
20 dBm Max |
| Security Features |
WEP,WPA |
| Security Key Bits |
64-Bit,128-Bit,256-Bit |
| Dimensions |
6.53"x3.62"x1.1" |
| (WxHxD) |
166mmx92mmx28mm |
| Weight |
(0.24kg) |
| Power |
12v,1A |
| Operating Temp |
32 to 104?F(0 to 40?C) |
| Operating Humidity |
10 to 95% RH,Non-condensing |
|
1. What is LEO-54G-Dl 3G Router? |
| The Leoxsys LEO-54G-DL Wireless-G ADSL2+ Modem + Router is compatible with latest IEEE802.11G
standard which supports high data rate.It also supports ADSL2+ speed upto 24Mbps.
Ease to connect ADSL or ADSL2+ with LEO-54G-DL and build up personal WiFi Hotspot to connect computers/laptops/Iphones/Ipods/Wifi enabled mobile phones.
|
|
|
2.How can I setup router? |
| Connect the WAN(RJ-11 Line Port)port to ADSL cable and LAN(yellow color)port to your system.
And the following are the default parameters for the setup,
Default Router IP : 192.168.1.1
Default Username : admin
Default Password : admin
Default WiFi SSID : leoXsys-ADSL
When you setup and open the router with the ip address 192.168.1.1 in the browser, you will get home page of the router.
|
|
|
3.If I dont get home page with the above setup what can I do ? |
Go to start menu-->Run. Type cmd or command the press ok. Check ipconfig, if default gateway is not 192.168.1.1 then follow these steps,
Release the connecton using the command ipconfig /release.
Reconnect it using the command ipconfig /renew , then you will get default gateway 192.168.1.1
Now open the router with the ip address 192.168.1.1 in the browser. |
|
|
6.How can I setup DDNS? |
This function is not implemented yet, it will available in next firmware, other port forwarding and DMZ is available.
|
|
|
13.How can I reset the router? |
| The device can also be reset back to factory default settings by clicking on ?LoadDefault? button. Use the restore feature only if necessary. This will erase previously saved settings for the unit. Make sure to save your system settings before doing a factory restore.
Or you can hold the small button reset button ,which is beside power button in the router, for 5 to 10 seconds then the router will be reset.
|
|